Port Qos Configuration - Interlogix IFS NS3601-24P User Manual

•
Traffic Class
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page.

Port QoS Configuration

This page allows you to configure QoS settings for each port.
• Frames can be classified by 4 different QoS classes: Low, Normal, Medium, and High.
• The classification is controlled by a QCL that is assigned to each port.
• A QCL consists of an ordered list of up to 12 QCEs.
• Each QCE can be used to classify certain frames to a specific QoS class.
• This classification can be based on parameters such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority.
• Frames not matching any of the QCEs are classified to the default QoS class for the port.
• The settings relate to the currently selected stack unit, as reflected by the page header.
The Port QoS Configuration screen is shown
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
number. The port range allowed is from 0 to 65535.
DSCP: The allowed range is 0 to 63. ToS or Tag Priority do not have type value
settings.
Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class that can be
configured for each priority.
Figure 4-9-9.
151