Port Management; Port Configuration - Interlogix IFS NS3601-24P User Manual

•
Read View Name
• Write View Name
Buttons
: Click to add a new access entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

Port Management

Use the Port Menu to display or configure the Managed Switch's ports. This section has the following items:

Port Configuration

Port Statistics Overview
Port Statistics Detail
SFP Module Information
Port Mirror
Port Configuration
This page displays current port configurations. Ports can also be configured here. The port settings relate to the currently selected
stack unit, as reflected by the page header. The table has one row for each port on the selected switch in the stack and a number of
columns, which are:
The Port Configuration screen is shown
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Auth, NoPriv: Authentication and none privacy.
Auth, Priv: Authentication and privacy.
The name of the MIB view defining the MIB objects for which this request may
request the current values. The allowed string length is 1 to 32, and the allowed
content is the ASCII characters from 33 to 126.
The name of the MIB view defining the MIB objects for which this request may
potentially SET new values. The allowed string length is 1 to 32, and the allowed
content is the ASCII characters from 33 to 126.
Configures port connection settings
Lists Ethernet and RMON port statistics
Display SFP information
Sets the source and target ports for mirroring
Figure 4-4-1.
75