Quality Of Service Command - Interlogix IFS NS3601-24P User Manual

SWITCH/>poe alloc_power 1-4 10
PoE Power Supply
Description:
Set or show the value of the power supply.
Syntax:
PoE Power_Supply [<supply_power>]
Parameters:
<supply_power>: PoE power for a power supply
Example:
Set 200 watts of power supply.
SWITCH/>poe power_supply 200
PoE Status
Description:
Show PoE status.
Syntax:
PoE Status

Quality of Service Command

QoS Configuration
Description:
Show QoS Configuration.
Syntax:
QoS Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show QoS Configuration of port 1-4.
SWITCH/>qos configuration 1-4
QoS Configuration:
==================
Traffic Classes: 4
Storm Multicast: Disabled
Storm Broadcast: Disabled
Storm Unicast : Disabled
Port Default Tag Priority QCL ID Rate Limiter
---- ------- ------------
1 Low 0
2 Low 0
3 Low 0
4 Low 0
1 pps
1 pps
1 pps
------ ------------
1 Disabled
1 Disabled
1 Disabled
1 Disabled
363
User's Manual of NS3601-24P/4S Series
Shaper Mode Weight
--------- -------- ------
Disabled Strict 1/2/4/8
Disabled Strict 1/2/4/8
Disabled Strict 1/2/4/8
Disabled Strict 1/2/4/8