Port Mode; Port Flow Control - Interlogix IFS NS3601-24P User Manual

Parameters:
<port_list>: Port list or 'all', default: All ports
: Show ports, which are up
up
: Show ports, which are down
down
(default: Show all ports)
Example:
Display port1~4 status
SWITCH/>port configuration 1-4
Port Configuration:
===================
Port State Mode
---- -------- ------
1 Enabled Auto
2 Enabled Auto
3 Enabled Auto
4 Enabled Auto

Port Mode

Description:
Set or show the port speed and duplex mode.
Syntax:
Port Mode [<port_list>] [10hdx|10fdx|100hdx|100fdx|1000fdx|auto]
Parameters:
<port_list>: Port list or 'all', default: All ports
: 10 Mbps, half duplex
10hdx
: 10 Mbps, full duplex
10fdx
: 100 Mbps, half duplex
100hdx
: 100 Mbps, full duplex
100fdx
: 1 Gbps, full duplex
1000fdx
: Auto negotiation of speed and duplex
auto
(default: Show configured and current mode)
Default Setting:
Auto
Example:
Set 10Mbps (half duplex) speed for port1
SWITCH/>port mode 1 10hdx

Port Flow Control

Description:
Set or show the port flow control mode.
Syntax:
Port Flow Control [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Enable flow control
enable
: Disable flow control
disable
(default: Show flow control mode)
Default Setting:
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Flow Control MaxFrame Power
------------ --------
Disabled 9600
Disabled 9600
Disabled 9600
Disabled 9600
Excessive Link
-------- --------- ----
Enabled Discard Down
Enabled Discard Down
Enabled Discard Down
Enabled Discard Down
278