Firmware Command; Upnp Command - Interlogix IFS NS3601-24P User Manual

Firmware Command

Firmware Load
Description:
Load new firmware from TFTP server.
Syntax:
Firmware Load <ip_addr_string> <file_name>
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
: Firmware file name
<file_name>
Firmware IPv6 Load
Description:
Load new firmware from IPv6 TFTP server.
Syntax:
Firmware IPv6 Load <ipv6_server> <file_name>
Parameters:
<ipv6_server>: TFTP server IPv6 address

UPnP Command

UPnP Configuration
Description:
Show UPnP configuration.
Syntax:
UPnP Configuration
Example:
Show UPnP configuration.
SWITCH/>upnp configuration
UPnP Configuration:
===================
UPnP Mode
UPnP TTL
UPnP Advertising Duration : 100
UPnP Mode
Description:
Set or show the UPnP mode.
Syntax:
UPnP Mode [enable|disable]
Parameters:
: Disabled
: 4
371
User's Manual of NS3601-24P/4S Series