Security Network Limit Agetime; Security Network Limit Port; Security Network Limit Limit - Interlogix IFS NS3601-24P User Manual

disable : Disable aging
(default: Show current enabledness of aging)
Default Setting:
disable
Example:
Enable limit aging
SWITCH/>security network limit aging enable

Security Network Limit Agetime

Description:
Time in seconds between check for activity on learned MAC addresses.
Syntax:
Security Network Limit Agetime [<age_time>]
Parameters:
<age_time>: Time in seconds between checks for activity on a MAC address (10-10000000 seconds)
(default: Show current age time)
Default Setting:
3600
Example:
Set age time in 100sec.
SWITCH/>security network limit agetime 100

Security Network Limit Port

Description:
Set or show per-port enabledness.
Syntax:
Security Network Limit Port [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port security on this port
disable : Disable port security on this port
(default: Show current port enabledness of port security limit control)
Default Setting:
disable
Example:
Enable port limit for port 1
SWITCH/>security network limit port 1 enable

Security Network Limit Limit

Description:
Set or show the max. number of MAC addresses that can be learned on this set of ports.
Syntax:
Security Network Limit Limit [<port_list>] [<limit>]
Parameters:
User's Manual of NS3601-24P/4S Series
314