Bridge Status - Interlogix IFS NS3601-24P User Manual

•
Max Age
• Maximum Hop Count
•
Transmit Hold Count
Advanced Settings
Object
•
Edge Port BPDU
Filtering
•
Edge Port BPDU Guard
• Port Error Recovery
•
Port Error Recovery
Timeout
The Gigabit Ethernet Switch implements the Rapid Spanning Protocol as the default spanning tree
protocol. While selecting "Compatible" mode, the system use the RSTP (802.1w) to compatible
and co work with another STP (802.1d)'s BPDU control packets.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

Bridge Status

This page provides a status overview for all STP bridge instances.
The displayed table contains a row for each STP bridge instance, where the column displays the following information: The STP
Bridge Status screen is shown
The page includes the following fields:
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
The maximum age of the information transmitted by the Bridge when it is the
Root Bridge. Valid values are in the range 6 to 200 seconds.
-Default: 20
-Minimum: The higher of 6 or [2 x (Hello Time + 1)].
-Maximum: The lower of 40 or [2 x (Forward Delay -1)]
This defines the initial value of remaining Hops for MSTI information generated at
the boundary of an MSTI region. It defines how many bridges a root bridge can
distribute its BPDU information. Valid values are in the range 6 to 40 hops.
The number of BPDU's a bridge port can send per second. When exceeded,
transmission of the next BPDU will be delayed. Valid values are in the range 1 to
10 BPDU's per second.
Description
Control whether a port explicitly configured as Edge will transmit and receive
BPDUs.
Control whether a port explicitly configured as Edge will disable itself upon
reception of a BPDU. The port will enter the error-disabled state, and will be
removed from the active topology.
Control whether a port in the error-disabled state automatically will be enabled
after a certain time. If recovery is not enabled, ports have to be disabled and
re-enabled for normal STP operation. The condition is also cleared by a system
reboot.
The time that has to pass before a port in the error-disabled state can be
enabled. Valid values are between 30 and 86400 seconds (24 hours).
Figure 4-7-8.
Figure 4-7-8 STP Bridge Status page screenshot
119