Qos Qcl Lookup; Qos Mode; Qos Weight; Qos Rate Limiter - Interlogix IFS NS3601-24P User Manual

QoS QCL Lookup

Description:
Lookup QCE.
Syntax:
QoS QCL Lookup [<qcl_id>] [<qce_id>]
Parameters:
<qcl_id>: QCL ID
<qce_id>: QCE ID (1-24)

QoS Mode

Description:
Set or show the port egress scheduler mode.
Syntax:
QoS Mode [<port_list>] [strict|weighted]
Parameters:
<port_list>: Port list or 'all', default: All ports
strict : Strict mode
weighted: Weighted mode
(default: Show QoS mode)
Default Setting:
Strict
Example:
Set weighted mode for port15
SWITCH/>qos mode 15 weighted

QoS Weight

Description:
Set or show the port egress scheduler weight.
Syntax:
QoS Weight [<port_list>] [<class>] [<weight>]
Parameters:
<port_list> : Port list or 'all', default: All ports
: Traffic class low/normal/medium/high or 1/2/3/4
<class>
: Traffic class weight 1/2/4/8
<weight>

QoS Rate Limiter

Description:
Set or show the port rate limiter.
Syntax:
QoS Rate Limiter [<port_list>] [enable|disable] [<bit_rate>]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Enable rate limiter
enable
: Disable rate limiter
disable
(default: Show rate limiter mode)
<bit_rate> : Rate in 1000 bits per second (500-1000000 kbps)
Default Setting:
User's Manual of NS3601-24P/4S Series
366