Security Network Nas Agetime; Security Network Nas Holdtime - Interlogix IFS NS3601-24P User Manual

Parameters:
<eapol_timeout>: Time between EAPOL retransmissions (1-65535 seconds)
(default: Show current EAPOL retransmission timeout)
Default Setting:
30
Example:
Set the time between EAPOL retransmissions for 100sec.
SWITCH/>security network nas eapoltimeout 100

Security Network NAS Agetime

Description:
Time in seconds between check for activity on successfully authenticated MAC addresses.
Syntax:
Security Network NAS Agetime [<age_time>]
Parameters:
<age_time>: Time between checks for activitiy on a MAC address that succeeded autentication
(default: Show current age time)
Default Setting:
300
Example:
Set NAS age time in 1000sec
SWITCH/>security network nas agetime 1000

Security Network NAS Holdtime

Description:
Time in seconds before a MAC-address that failed authentication gets a new authentication chance.
Syntax:
Security Network NAS Holdtime [<hold_time>]
Parameters:
<hold_time>: Hold time before MAC addresses that failed authentication expire
(default: Show current hold time)
Default Setting:
10
Example:
Set NAS hold time in 100sec
SWITCH/>security network nas holdtime 100
Security Network NAS RADIUS_QoS
Description:
Set or show either global enabledness (use the global keyword) or per-port enabledness of RADIUS-assigned QoS.
Syntax:
Security Network NAS RADIUS_QoS [global|<port_list>] [enable|disable]
Parameters:
: Select the global RADIUS-assigned QoS setting
global
User's Manual of NS3601-24P/4S Series
318