Security; Port Limit Control - Interlogix IFS NS3601-24P User Manual

9. Enter the user name, password and the logon domain that your account belongs.
10. Click "OK" to complete the validation process.

Security

This section is to control the access of the Managed Switch, and includes the user access and management control.
The Security page contains links to the following main topics:

Port Limit Control

Access Management
HTTPs / SSH
DHCP Snooping
IP Source Guard
ARP Inspection
Port Limit Control
This page allows you to configure the Port Security Limit Control system and port settings.
Limit Control allows for limiting the number of users on a given port. A user is identified by a MAC address and VLAN ID. If Limit
Control is enabled on a port, the limit specifies the maximum number of users on the port. If this number is exceeded, an action is
taken. The action can be one of four different as described below.
The Limit Control module is one of a range of modules that utilizes a lower-layer module, the Port Security module, which manages
MAC addresses learned on the port.
The Limit Control configuration consists of two sections, a system- and a port-wide. The Port Limit Control Configuration screen is
shown Figure 4-12-1.
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure 4-11-21
205