Security Network Ip Source Guard Status; Security Network Arp Inspection Configuration; Security Network Arp Inspection Mode - Interlogix IFS NS3601-24P User Manual

<port_list> : Port list or 'all', default: All ports
: Add new port IP source guard static entry
add
delete : Delete existing port IP source guard static entry
: VLAN ID (1-4095)
<vid>
<allowed_ip>: IP address (a.b.c.d), IP address allowed for doing ARP request
: IP mask (a.b.c.d), IP mask for allowed IP address
<ip_mask>
Example:
Add IP source guard static entry.
SWITCH/>security network ip source guard entry 1 add 1 192.168.0.20 255.255.255.0

Security Network IP Source Guard Status

Description:
Show IP source guard static and dynamic entries.
Syntax:
Security Network IP Source Guard Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show IP source guard static and dynamic entries.
SWITCH/>security network ip source guard status

Security Network ARP Inspection Configuration

Description:
Show ARP inspection configuration.
Syntax:
Security Network ARP Inspection Configuration
Example:
Show ARP inspection configuration.
SWITCH/>security network arp inspection configuration

Security Network ARP Inspection Mode

Description:
Set or show ARP inspection mode.
Syntax:
Security Network ARP Inspection Mode [enable|disable]
Parameters:
enable : Enable ARP Inspection
disable: Disable ARP Inspection
Default Setting:
disable
Example:
Enable ARP inspection mode
SWITCH/>security network arp inspection mode enable
User's Manual of NS3601-24P/4S Series
331