Snmpv3 Groups Configuration; Snmpv3 Views Configuration - Interlogix IFS NS3601-24P User Manual

SNMPv3 Groups Configuration

Configure SNMPv3 groups table on this page. The entry index keys are Security Model and Security Name. The SNMPv3 Groups
Configuration screen is shown
The page includes the following fields:
Object
•
Delete
•
Security Model
•
Security Name
•
Group Name
Buttons
: Click to add a new group entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

SNMPv3 Views Configuration

Configure SNMPv3 views table on this page. The entry index key are View Name and OID Subtree. The SNMPv3 Views
Configuration screen is shown
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure 4-3-6.
Figure 4-3-6 SNMPv3 Groups Configuration page screenshot
Description
Check to delete the entry. It will be deleted during the next save.
Indicates the security model that this entry should belong to. Possible security
models are:
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM).
A string identifying the security name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
A string identifying the group name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
Figure 4-3-7.
Figure 4-3-7 SNMPv3 Views Configuration page screenshot
73