Lacp Configuration - Interlogix IFS NS3601-24P User Manual

The page includes the following fields:
.Object
•
Locality
•
Group ID
•
Port Members
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

LACP Configuration

Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated Port links with other LACP ports located on a different
device. LACP allows switches connected to each other to discover automatically whether any ports are member of the same LAG.
This page allows the user to inspect the current LACP port configurations, and possibly change them as well. The LACP port
settings relate to the currently selected stack unit, as reflected by the page header. The LACP Port Configuration screen is shown
Figure 4-5-4.
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure 4-5-3 Aggregation Group Configuration page screenshot
Description
Indicates the aggregation group type. This field is only valid for stackable
switches.
Global: The group members may reside on different units in the stack. The
device supports two 8-port global aggregations.
Local: The group members reside on the same unit. Each local aggregation may
consist of up to 16 members.
Indicates the group ID for the settings contained in the same row. Group ID
"Normal" indicates there is no aggregation. Only one group ID is valid per port.
Each switch port is listed for each group ID. Select a radio button to include a port
in an aggregation, or clear the radio button to remove the port from the
aggregation. By default, no ports belong to any aggregation group.
87