Qos Control List Configuration - Interlogix IFS NS3601-24P User Manual

QoS Control List Configuration

This page lists the QCEs for a given QCL.
Frames can be classified by 4 different QoS classes: Low, Normal, Medium, and High.
The classification is controlled by a QoS assigned to each port.
A QCL consists of an ordered list of up to 12 QCEs.
Each QCE can be used to classify certain frames to a specific QoS class.
This classification can be based on parameters such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority.
Frames not matching any of the QCEs are classified to the default QoS Class for the port.
The QoS Control List Configuration screen is shown
The page includes the following fields:
Object
•
QCL #
•
QCE Type
•
Type Value
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure 4-9-7.
Figure 4-9-7 QoS Control List Configuration page screenshot
Description
Select a QCL to display a table that lists all the QCEs for that particular QCL.
Specifies which frame field the QCE processes to determine the QoS class of the
frame.
The following QCE types are supported:
Ethernet Type: The Ethernet Type field. If frame is tagged, this
is the Ethernet Type that follows the tag header.
VLAN ID: VLAN ID. Only applicable if the frame is VLAN tagged.
TCP/UDP Port: IPv4 TCP/UDP source/destination port.
DSCP: IPv4 and IPv6 DSCP.
ToS: The 3 precedence bit in the ToS byte of the IPv4/IPv6 header
(also known as DS field).
Tag Priority: User Priority. Only applicable if the frame is
VLAN tagged or priority tagged.
Indicates the value according to its QCE type.
Ethernet Type: The field shows the Ethernet Type value.
149