Web Firmware Upgrade - Interlogix IFS NS3601-24P User Manual

Buttons
: Send a test mail to mail server to check this account is available or not.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

Web Firmware Upgrade

This page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen is shown
To open Firmware Upgrade screen perform the folling:
1. Click System -> Web Firmware Upgrade.
2. The Firmware Upgrade screen is displayed as in
3. Click the "
4. Select the firmware file and then click "
5. Once the software is loaded to the system successfully, the following screen. The system will load the new software after
reboot.
DO NOT Power OFF
Do not quit the Firmware Upgrade page without pressing the "OK" button - after the image
be loaded. Or the system won't apply the new firmware. User has to repeat the firmware
upgrade processes again.
Figure 4-2-18 Web Firmware Upgrade page screenshot
Figure
"button of the main page, the system would pop up the file selection menu to choose firmware.
Figure 4-2-19 Software successfully loaded notice screen
the Managed Switch until the update progress is complete.
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
4-2-18.
", the Software Upload Progress would show the file upload status.
61
Figure 4-2-18.