Poe Status - Interlogix IFS NS3601-24P User Manual

• Power Allocation
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

PoE Status

This page allows the user to inspect the total power consumption, total power reserved and current status for all PoE ports. The
screen is shown Figure 4-16-4.
The page includes the following fields:
Object
• Current Power
Consumption
• Total Power Reserved
• PoE Temperature Unit 1
• PoE Temperature Unit 2
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
It limits the port PoE supply. Per port maximum value must be less than 15.4
watts, and total ports values must be less than the Power Reservation value if
current PoE mode is 802.3af. Once power overload is detected, the port will
automatically shut down and keep on detection mode until PD's power
consumption is lower than the power limit value
Figure 4-16-4 PoE Status screenshot
Description
Show the total watts usage of PoE Switch.
Shows how much the total power be reserved for all PDs.
Display the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1~Port-12
Display the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13~Port-24
248