Radius Overview - Interlogix IFS NS3601-24P User Manual

TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns, which are:
Object
• #
• Enabled
• IP Address/Hostname
• Port
• Secret
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

RADIUS Overview

This page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration page. The
RADIUS Authentication/Accounting Server Overview screen is shown
Figure 4-11-8 RADIUS Authentication/Accounting Server Overview page screenshot
The page includes the following fields:
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Description
The TACACS+ Authentication Server number for which the configuration below
applies.
Enable the TACACS+ Authentication Server by checking this box.
The IP address or hostname of the TACACS+ Authentication Server. IP address
is expressed in dotted decimal notation.
The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0
(zero), the default port (49) is used on the TACACS+ Authentication Server.
The secret - up to 29 characters long - shared between the TACACS+
Authentication Server and the switch.
192
Figure 4-11-8.