Configure Poe Over Temperature Protection - Interlogix GE-DS-242-PoE User Manual

Chapter 6: Command Line Interface

Configure PoE Over Temperature Protection

poe temperature-protection enable[x4]
Description:
Configure PoE over temperature protection to enable or disable
Command Level
Global Configuration
Syntax:
poe temperature-protection { enable / disable }
Parameters:
<Enable > Enable PoE power budget change automatically by detected PoE unit
temperature
<Disable > Disable PoE power budget change automatically
PoE temperature-protection working in Priority mode or Total Limit mode
NOTE:
only.
Configure PoE - System
poe limit-mode
Description:
Configure System PoE power limit mode information
Command Level
Global Configuration
Syntax:
poe limit-mode { Port-Priority / Total-Limit }
[no] poe limit-mode
Parameters:
<Port Priority> Deliver PoE power by port priority setting
<Total Limit> Set limit value of the total POE port provided power to the PDs.
"no poe limit-mode" = No Limit.
NOTE:
194 GE-DS-242-PoE Managed Ethernet Switch User Manual