Serial Matrix Emulation - Printronix N7000 H-Series User Manual

Chapter 4
LinePrinter+ Emulation (N7000 STD)
Upr. Case Select
Controls how the printer handles lowercase characters it receives from the
host computer. When enabled, all characters will be printed in uppercase.
•
Disable (default). Prints lowercase characters received from the host
computer as lowercase, and prints uppercase characters received from
the computer as uppercase.
•
Enable. Prints lowercase characters received from the host computer as
their corresponding uppercase equivalents; uppercase characters
received from the computer print as uppercase.
Slew Relative
"Slewing" is rapid vertical paper movement. This parameter determines the
number of lines slewed (either 1-15 lines or 1-16 lines) when an EVFU Slew
Relative command is received. The options include:
•
1-15 Lines (default)
•
1-16 Lines

Serial Matrix Emulation

Printer
Protocol
(from page 86)
Serial
Matrix
Control Code Define CR
06
Code
8.0 LPI* CR = CR*
10.3 LPI
CR = CR + LF
6.0 LPI
Alt. Set Character
80-9F
Control Code* (see page 101) Even dot plot*
Printable
98
Auto LF Overstrike
Enable* Enable*
Disable Disable
ESC d
Set command
Double high
* = Factory Default
Define LF Printer
Code Select
LF = LF* Disable*
LF = CR + LF Enable