''
.5
Tractor (2)
4. Slide the left outboard mount block so that the left outer paper guide leaf
is .5 inches from the left tractor. (See Figure 28).
5. Slide the right outboard mount block so that the right outer paper guide
leaf is .5 inches from the right tractor.
6. Slide the center mount block so that the center paper guide leaf is
centered between the left and right outer paper guide leaves.
7. Install the paper guide knobs and front paper guide leaves.
(See Figure 27.)
Position the Paper Input and Adjust the Paper Guides
Outer Paper
Guide Leaf (2)
Outboard Mount
Block (2)
Figure 28. Adjusting Paper Guide Leaves
Center Paper
Guide Leaf
Paper
Center Mount
Block
''
.5
249