Chapter
7
Diagnosing Problems
Table 13. N7000 H-Series Fault Messages Troubleshooting
Displayed Message
E31G EVENT 6 BP
See User Manual
E31H EVENT 7 BP
See User Manual
E32A CND 0 BP
See User Manual
228
Can User
Explanation
Correct?
Yes
An illegal or unsupported
instruction was attempted in
the application program.
Yes
An illegal or unsupported
instruction was attempted in
the application program.
Yes
An illegal or unsupported
instruction was attempted in
the application program.
Solution
1. Cycle Power. Run the
print job again. If the
message appears, load
the latest emulation
software.
2. Cycle power. Run the
print job again. If the
message appears,
record the display
message and send it to
your next higher support
facility.
1. Cycle Power. Run the
print job again. If the
message appears, load
the latest emulation
software.
2. Cycle power. Run the
print job again. If the
message appears,
record the display
message and send it to
your next higher support
facility.
1. Cycle Power. Run the
print job again. If the
message appears, load
the latest emulation
software.
2. Cycle power. Run the
print job again. If the
message appears,
record the display
message and send it to
your next higher support
facility.