Printronix N7000 H-Series User Manual page 112

Chapter 4
LinePrinter + Emulation (N7000 H-Series)
High Density
•
Disable (default)
•
Enable. Allows the LQ typeface to print in higher print density, and it will
not take effect when other typefaces are selected.
Prop. Spacing
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space arround the character.
This parameter only works in ASCII mode.
•
Disable (default). Each character cell is printed with the same width.
•
Enable. The width of each character cell varies with the width of the
character.
NOTE: This parameter is not available for Hanzi GB printers with OKI
Bold Print
•
Disable (default). Text is printed normally.
•
Enable. Text is printed with a heavy line thickness.
Italic Print
•
Disable (default). Text is printed normally.
•
Forward Slant. Text is printed with a forward slant.
•
Backward Slant. Text is printed with a backward slant.
NOTE: This parameter is not available for Hanzi GB printers with OKI
Slashed Zero
This parameter allows you to print the number "0" with or without the slash.
•
Disable (default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
DBCS/ASCII Mode
•
DBCS Mode (default). The printer is in DBCS mode. It can print double-
byte characters as well as a limited number of single-byte characters.
•
ASCII Mode. The printer is in ASCII mode. It can only print single-byte
characters.
112
selected.
selected.