Table of Contents
Advertisement
Chapter
4
NETWORK SETUP Menu
DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting.
The options include:
•
Disable (default)
•
Enable.
ETHERNET PARAMS
ETHERNET
PARAMS
(from page 81)
NetBIOS
Protocol
Enable*
Disable
The ETHERNET PARAMS menu helps your printer communicate on a
network.
For information on assigning the IP Address, Gateway Address, Subnet
Mask, and MAC Address, refer to the Network Interface Card User's Manual.
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be available. The
selections are as indicated below:
•
Enable (default). Makes the NetBIOS protocol available with the ethernet
installed.
•
Disable. Makes the NetBIOS protocol unavailable during printer
operation.
ASCII Data Port
This option sets the port number for ASCII print jobs. The data port number
needs to match your host system setting.
•
9100 (default)
•
1023 - 65535
82
ASCII
Keep Alive
Data Port
Timer
9100*
3 Minutes*
1023 - 65535
2 - 10 Minutes
* = Factory Default
Ethernet
Job Control
Speed
Auto Select*
Standard*
10 Half Duplex
Enhanced
10 Full Duplex
Fast Standard
100 Half Duplex
Off
100 Full Duplex
Advertisement
Table of Contents
