Printer
Protocol
(from page 147)
Serial
Matrix
Control Code
06
6.0 LPI
CR = CR*
8.0 LPI*
CR = CR + LF
10.3 LPI
Alt. Set
80-9F
Control Code*
(see page 166) Even dot plot*
Printable
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Serial Matrix Emulation
Define CR
Auto LF
Code
Enable*
Enable*
Disable
Disable
Character
Esc d
Set
command
Double high
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (ACK).
You can select an alternate line spacing of 6, 8 or 10.3 LPI.
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends
Line Feeds to the printer.
•
CR = CR. Does not insert an extra Line Feed after each
Carriage Return.
Serial Matrix Emulation
* = Factory Default
Overstrike
Define LF
Code
LF = LF*
Disable*
LF = CR + LF
Enable
Printer
Select
163