Ignore Char - Printronix N7000 H-Series User Manual

Chapter 4
IGP/PGL Emulation
Var Form Type
This menu option applies only to the host command, CREATE;NAME or
CREATE;NAME;DISK. The host command CREATE;NAME followed by ;0, ;X
or a form length number will always override the menu option.
•
Add Nothing (default). No action.
•
Add; 0. When selected, the form length ends at the longest printed
element. Same as CREATE;NAME;0.
•
Add; X. When selected, the form length is the same as the physical page
length.
Compressed CPI
This parameter allows you to choose a compressed character (60% shorter)
for 17 or 20 cpi instead of the normal height character.
•
Disable (default). The PGL does not use compressed 17 or 20 cpi font.
•
Light Font. Uses the standard compressed 17 or 20 cpi font.
•
Dark Font. Uses a darker compressed 17 or 20 cpi font compatible with
the IGP-X00 printers.

Ignore Char

•
Ignore Mode
This parameter instructs the PGL to ignore the character selected under
the Select Character menu.
•
•
Character menu.
•
Select Char
Instructs the PGL which decimal character (0-255) to ignore from the
host.
128
Disable (default). The PGL does not ignore any characters.
Enable. The PGL ignores the characters specified in the Select