Printronix N7000 H-Series User Manual page 114

Chapter 4
LinePrinter + Emulation (N7000 H-Series)
Compressed Mode
This parameter allows you to specify the appearance of ASCII/DBCS
characters in ASCII mode.
•
Disable (default)
•
Enable. Prints out ASCII mode ASCII characters and half-width DBCS
characters.
NOTE: This parameter is not available for Hanzi GB printers with OKI
DBCS Compressed
This parameter allows you to specify the appearance of ASCII/DBCS
characters in DBCS mode.
•
Disable (default)
•
Enable. Both the DBCS and ASCII characters will be printed as half-width
of their original size.
Encoding
•
Address Table (default). Specifies the address table supported.
•
UTF-8. The printer takes in UTF-8 data stream and prints out according to
Unicode format.
Taller 15 CPI
This parameter allows you to specify the appearance of ASCII characters as
15 CPI in ASCII mode.
•
Disable (default). The characters in 15 CPI appear shorter than other
CPIs such as 10 CPI.
•
Enable. The height of 15 CPI characters is the same as other CPIs such
as 10 CPI.
NOTE: This parameter is not available for Hanzi GB printers with OKI
Horizontal Expnd
This parameter allows you to specify dot character horizontal expansion for
both ASCII and DBCS characters in DBCS mode.
NOTE: This parameter is not available for Hanzi GB printers with OKI
114
selected.
GB18030 is for Hanzi GB printer.
BIG5 (default), CNS, TCA, ETEN, IBM5550, TELETEXT, BIG5+,
BIG5E, and HKSCS are for Hanzi Big5 printer.
selected.
selected.