Table 13. N7000 H-Series Fault Messages Troubleshooting
Displayed Message
TCP PORT BUSY
Yes
1
Before contacting an authorized service representative, power off the printer, wait 15 seconds, then
power it back on and rerun your print job. If the message reappears, press CLEAR. If the fault message still
displays, then contact your authorized service representative.
Can User
Explanation
Correct?
Error message reported by
the Printer Manager when
ethernet interface option is
installed. The network
address given in the printer
properties was reached, but
the printer port is busy.
N7000 H-Series Printers Fault Messages
Solution
Refer to the Printronix N7000
Maintenance Manual.
237