OKI Menu
OFFLINE
EMULATION
LinePrinter+
Printer
Protocol
OKI
(from page 110)
Define CR
Auto LF
Code
CR = CR*
Enable*
CR = CR + LF
Disable
Define CR Code
The Define CR Code option controls the action of the printer when it receives
a Carriage Return code (hex 0D) from the host computer. If this feature is
enabled, each time the printer receives a Carriage Return, it inserts an
additional Line Feed code (hex 0A) into the data stream. Do not use this
feature if the host computer sends Line Feeds to the printer.
•
CR = CR. Does not insert an extra Line Feed after each Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
Auto LF
This option defines the printer actions when print data is received past the
forms width setting.
•
Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
•
Disable. Discards any data past the forms width.
Printer Select
Define LF
Code
LF = CR + LF*
Disable*
LF = LF
Enable
OKI Menu
* = Factory Default
Character
Set
HS ANK 1*
HD ANK 1
HS ANK 2
HD ANK 2
117