OKI Menu
OFFLINE
EMULATION
Line Printer+
Printer
Protocol
OKI
Define CR
Code
CR = CR*
CR = CR + LF
Define CR Code
The Define CR Code option controls the action of the printer when it receives a Carriage Return code
(hex 0D) from the host computer. If this feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the
host computer sends Line Feeds to the printer.
•
CR = CR. Does not insert an extra Line Feed after each Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
Auto LF
This option defines the printer actions when print data is received past the forms width setting.
•
Enable. Performs an automatic carriage return and line feed when data is received past the forms
width.
•
Disable. Discards any data past the forms width.
66
*=
Factory Default
Define LF
Auto LF
Code
Enable*
LF = CR = LF*
Disable
LF = LF
Character
Printer Select
Set
Disable*
HS ANK 1*
Enable
HD ANK 1
HS ANK 2
HD ANK 2