Activation Procedure; Serial Number; View Currently Installed Features; Enter Access Codes - Comtech EF Data CDM-700 Installation And Operation Manual

CDM-700 High Speed Satellite Modem
FAST Activation Procedure
A.2

Activation Procedure

A.2.1

Serial Number

Obtain the Modem serial number as follows:
a. From the main menu, select
b. The Modem motherboard Serial Number is displayed on the bottom line, to the left.
c. Record serial number:
A.2.2

View currently installed features

To view the currently installed features, proceed as follows:
a. From the main menu, select
b. From the
c. Scroll through the Modem Options and note which are 'Installed' or 'Not
Installed'. Any that are 'Not Installed' may be purchased as a FAST
upgrade.
Contact a Comtech EF Data sales representative to order features. You will be asked to provide
the Modem Serial Number. Comtech EF Data Customer Support personnel will verify the order
and provide an invoice and instructions, including a 20-character configuration code.
A.2.3

Enter Access Codes

Enter the access codes as follows:
a. Press [CLEAR] to return to the
b. Select
d. Press [ENTER].
e. Use [←][→] and [↑][↓] arrow keys to enter the 20-character configuration code.
f. Press [ENTER].
If everything has been entered correctly, the display will show "
and the modem resets to its default configuration.
FAST
FAST
FAST OPTIONS menu, select
SET
.
, then [ENTER].
, then [ENTER].
VIEW
, then [ENTER].
menu.
FAST OPTIONS
CONFIGURED CORRECTLY
A–2
Revision 5
MN/CDM700.IOM
"