Comtech EF Data CDM-700 Installation And Operation Manual page 169

CDM-700 High Speed Satellite Modem
Remote Control
Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
OC3 Interface OAM= 7 bytes
Alarm Mask
Gigabit GAM= 3 bytes
Interface
Alarm Mask
Active Bulk IMG= 1 byte
Image
Circuit ID CID= 24 bytes
String
Configuration CST= 1 byte
Save
Description of Arguments
to Query
Command or Query.
Alarm mask conditions, in form spa, where:
s=slot number
p=port number
21
a=Tx Cable (0 = masked as Alarm,1 = masked as Fault,2 =Masked)
b=x reserved
c=x reserved
d=Bufferslip Alarm (0 = masked as Alarm,1 = masked as Fault, 2
=Masked
e= x reserved
Example: OAM= 110xx0x( alarm masks for interface slot 1, port 1 )
Command or Query.
Alarm mask conditions, in form spa, where:
s=slot number
p=port number
a=Tx Cable (0=masked as Alarm, 1=masked as Fault, 2=Masked)
Note: Command valid only with Gigabit interface.
Example: GAM=110 (alarm masks for interface slot 1, port 1.
Comand or Query.
Sets or queries the active bulk image.
n=Bulk Image Number (1, 2)
Command or Query.
Sets or queries the user-defined Circuit ID string, which is a fixed
length of 24 characters.
Valid characters include:
Space ( ) * + – , . / 0 9 and A thru Z
Command only.
Command causes the CDM700L to store the current modem
configuration in Configuration Memory location defined by the
one-byte argument (0 to 9).
Example: CST=4 (store the current configuration in location 4)
Response to
Command
OAM=
OAM?
OAM*
OAM#
GAM=
GAM?
GAM*
GAM#
IMG=
IMG?
IMG*
IMG#
CID=
CID?
CID*
CID#
CST=
CST?
CST*
CST#
11–19
Revision 5
MN/CDM700.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
OAM?sp OAM=spaxxdx
GAM?sp GAM=spa
IMG? IMG=n
CID? CID=xxxxxxxxxxxxxxxx
xxxxxxxx
N/A N/A