Table of Contents
Advertisement
CDM-700 High Speed Satellite Modem
Front Panel Operation
The following attributes are supported for association with each VLAN:
VLAN
1... 4094 N - Native
1... 4094 M - Management
1...4094
T - Tagged
1... 4094 U - Untagged
To scroll active VLANs on the front panel, use the
following table:
VLAN
0001
0001
VLAN ID = n
To Edit the VLAN ID of NATIVE VLANs:
VLANID Attribute
0001
•
Use the
•
Press
ENTER;
•
Use the
Tag
Direction
Lan
WAN
END
LAN
END
WAN
LAN
END
WAN
WAN
LAN
WAN
WAN
Attribute
Remarks
Native
Add
Management
Add
Tagged/Untagged Delete
NATIVE
Add
arrow keys to toggle between MNGMENT and NATIVE;
arrow keys to change the NATIVE VLAN ID (on the bottom left of the display).
Only one per port. Only applies to packets from the
LAN. Management traffic is specified by the
Management Port PVID.
Only one per table. Defaults to 1 and can be
changed to any valid entry. Will strip all packets
going to the Endstation and will add the appropriate
tag entry for all packets leaving the Endstation.
END
If the VLAN of the packet arriving from the WAN or
LAN
LAN matches the VLAN tag, the packet passes
unchanged.
Configuring a VLAN with this attribute will identify
the LAN port as a member of the VLAN. The LAN
LAN
frame will be removed and the packet will go out
untagged.
arrow keys. Information is displayed per the
6–46
Revision 5
MN/CDM700.IOM
Comment
Advertisement
Table of Contents
