Table of Contents
Advertisement
CDM-700 High Speed Satellite Modem
Front Panel Operation
UTIL:
Display
Edit Display Brightness:
100%
Brightness levels of 25%, 50%, 75% or 100% are selectable. Edit the display brightness using
the
arrow keys. Once the desired brightness has been set, press
UTIL:
Firmware
THESE MENUS ARE FOR DIAGNOSTIC PURPOSES ONLY. DO NOT
CHANGE AN IMAGE UNLESS INSTRUCTED TO DO SO BY COMTECH
EF DATA CUSTOMER SERVICE TECHNICIANS.
IMPORTANT
The submenus available under UTIL: Firmware permit viewing information about the CDM-700
internal firmware. The modem stores two complete firmware images, and the user can select which
image will be loaded the next time the unit reboots.
Firmware Images:
Info
Select either Info or Select using the
If Firmware Images: Info is selected:
Firmware Info:
Image#1
The user can view information on the Bootrom and the two images. Select Bootrom, Image#1, or
Image#2 using the
If Firmware Info:
Bootrom:
CDM7XX_Boot
The information on the installed Bootrom firmware is provided; on the top display line, the
release date is provided in DAY/MONTH/YEAR format. The bottom line provides the Firmware
release number and its installed version number.
Press
or
ENTER
(
E)
Select
(
Bootrom
Image#2
arrow keys, then press
Bootrom is selected:
to return back to the previous menu.
CLEAR
E)
arrow keys, then press
.
ENTER
XX/XX/XX
X.X.X
6–67
Revision 5
MN/CDM700.IOM
.
ENTER
.
ENTER
Advertisement
Table of Contents
