Table of Contents
Advertisement
CDM-700 High Speed Satellite Modem
Remote Control
Command
Arguments
Parameter
(Instruction
for Command
Type
Code and
or Response
Qualifier)
Equipment ID
N/A
12 bytes
VLAN Mode
SVM=
2 Bytes
Description of Arguments
to Query
Query only.
Unit returns information concerning the equipment identification, and the
option field, in the form abbbcdefghij;
where:
aaa=defines the model number (700 in this case)
b=Turbo H/W option: 0=None, 1=Turbo, 2=TPC/LDPC
c= Tx Symbol Rate S/W option: 0=Base (15.0 Msps), 1=Up to 22.5 Msps,
2=Up to 30.0 Msps, 3=Up to 37.5 Msps, 4=Up to 45.0 Msps,
5=Up to 64 Msps
d=Rx Symbol Rate S/W option: 0=Base (15.0 Msps), 1=Up to 22.5 Msps,
2=Up to 30.0 Msps, 3=Up to 37.5 Msps, 4=Up to 45.0 Msps,
5=Up to 64 Msps
e=Tx Higher-order modulation: 0=None, 1=8PSK, 2=16-QAM,
3=64-QAM, 4=8PSK and 16-QAM, 5=8PSK, 16-QAM and 64QAM
f=Rx Higher-order modulation: 0=None, 1=8PSK, 2=16-QAM,
3=64-QAM, 4=8PSK and 16-QAM, 5=8PSK, 16-QAM and 64QAM
g=Mod configuration: 0=Not installed, 1=70/140, 2=L-Band
h=Demod configuration: 0=Not installed, 1=70/140, 2=L-Band
i=Interface #1 status: 0=E3/T3/STS-1 Card Installed,
1-2=Reserved, 3=OC3 Card Installed, 4=Gigabit Ethernet Card
Installed, 5=HSSI Card Installed, 6-E=Reserved, F=Not Installed
j=Interface #2 status: 0=E3/T3/STS-1 Card Installed,
1-2=Reserved, 3=OC3 Card Installed, 4=Gigabit Ethernet Card
Installed, 5=HSSI Card Installed, 6-E=Reserved, F=Not Installed
Example: EID=700155111100 is a CDM-700 modem with Turbo installed,
capable of transmitting and receiving up to 64.0 Msps
8PSK with both interface slots filled with E3/T3/STS-1 cards.
Command or Query.
a=Interface Slot (1 or 2)
b=Normal or VLAN(0=Normal, 1=VLAN)
Response to
Command
N/A
using QPSK or
SVM=
SVM?
SVM#
11–28
Revision 5
MN/CDM700.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
EID?
EID=aaabcdefghij
(see description of
arguments)
SVM?a
SVM=ab
Advertisement
Table of Contents
