Comtech EF Data CDM-700 Installation And Operation Manual page 177

CDM-700 High Speed Satellite Modem
Remote Control
Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
Dual G.703 BGC=DGC 28 Bytes
Port port1,DGC
Configuration port 2
Dual G.703 DGC= 14 bytes
Global
Configuration
Description of Arguments
to Query
Command or Query.
a=Interface Slot (1or 2)
b=Interface Port (1)
c=Interface Mode (E3/T3/STS1)
d=Line Coding Enabled(0=None, 1 =Enabled)
Enabled :
E3 – HDB3
T3,STS1 – B3ZS
e=Framing Type (0=None, 1=G.751, 2=G.752, 3=G.753, 4=STS-1) *RFM
f=Tx Enable (0=Disabled, 1=Enabled)
g=Tx Data Invert (0=Non-Inverted, 1=Inverted)
h=Rx Enable (0=Disabled, 1=Enabled)
i=Rx Data Invert (0=Non-Inverted, 1=Inverted)
j=Rx Clock Source (0=Reserved, 1=External, 2=Rx, 3=Tx)
k=Receive Buffer Size (in milliseconds)
*IAM
m1=Alarm Masking for TxData
m2=Alarm Masking for TxAIS
m3=Alarm Masking for RxAIS
m4=AlarmMasking for Buffer Slip
m5=Alarm Masking for External Clock
a=Interface Slot (1 or 2)
b=Interface Port (2)
same as port 1
Command or Query.
a=Interface Slot (1 or 2)
b=Interface Port (1 or 2)
c=Interface Mode (E3/T3/STS1)
d=Line Coding Enabled(0=None, 1 =Enabled)
Enabled :
E3 – HDB3
T3,STS1 – B3ZS
e=Framing Type (0=None, 1=G.751, 2=G.752, 3=G.753, 4=STS-1) *RFM
f=Tx Enable (0=Disabled, 1=Enabled)
g=Tx Data Invert (0=Non-Inverted, 1=Inverted)
h=Rx Enable (0=Disabled, 1=Enabled)
i=Rx Data Invert (0=Non-Inverted, 1=Inverted)
j=Rx Clock Source (0=Reserved, 1=External, 2=Rx, 3=Tx)
k=Receive Buffer Size (in milliseconds)
Response to
Command
BGC=
*ETS
*TLC
*TIE
*TDI
*RIE
*RDI
*RCK
*RBS
DGC=
DGC?
DGC#
*ETS
DGC*
*TLC
*TIE
*TDI
*RIE
*RDI
*RCK
*RBS
11–27
Revision 5
MN/CDM700.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
Response N/A
Only To IFA?
or IFB? with
Dual G.703
DGC?ab DGC=abcdefghijkk.k