Table of Contents
Advertisement
CDM-700 High Speed Satellite Modem
Remote Control
Command
Arguments
Parameter
(Instruction
for Command
Type
Code and
or Response
Qualifier)
Configuration
CLD=
1 byte
Load
ReCenter
RCB=
2 bytes
Buffer
RTC Date
DAY=
8 bytes
RTC Time
TIM=
8 bytes
Number of
N/A
3 bytes
Unread stored
Events
Description of Arguments
to Query
Command only.
Causes the CDM700L to retrieve a previously stored modem
configuration from Configuration Memory location defined by the
one-byte argument (0 to 9).
Example: CLD=4 (retrieve modem configuration from location 4)
Command only.
Forces the software to recenter the receive Plesiochronous/Doppler
buffer.
s=Defines which interface slot ( 1 or 2 )
c=Defines which channel ( 1 to 2 )
Example: RCB=11 (ReCenter buffer on interface 1 channel 1)
Command or Query.
A date in the form ddmmyy, where
dd = day of the month (01 to 31),
mm = month (01 to 12)
yy = year (00 to 99)
Example: DAY=24-04-57 (April 24, 2057)
Command or Query.
A time in the form hhmmss, indicating the time from midnight,
where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=23:12:59 (23 hours:12 minutes:59 seconds)
Query only.
Unit returns the Number of stored Events, which remain Unread, in
the form xxx.
Note: This means unread over the remote control.
Example: NUE=126
Response to
Command
CLD=
CLD?
CLD*
CLD#
RCB=
RCB?
RCB*
RCB#
DAY=
DAY?
DAY*
DAY#
TIM=
TIM?
TIM*
TIM#
N/A
11–20
Revision 5
MN/CDM700.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
N/A
N/A
N/A
N/A
DAY?
DAY=dd-mm-yy
TIM?
TIM=hh:mm:ss
NUE?
NUE=xxx
Advertisement
Table of Contents
