Device Setting - D-Link 24-Port 10/100Mbps PoE Web Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP DES-1228P User Manual

Delete Item: Deletes the device from the Monitor List.

Device Setting

Function buttons of the Device Setting section provide several options.
Configuration Setting: In the Configuration Setting, the following
settings are available: Product Name, MAC Address, IP Address,
Subnet Mask, Gateway, Set Trap to (Trapping IP Address), System
name, Location, Password and DHCP ON/OFF (OFF is default).
After selecting the device from the Discovery List or Monitor List and
pressing Configuration Setting, modify the information necessary and
press "Set".
Figure 10 – Configuration Setting
Password Change: To change the password, fill in the new and
original password, and press "Set".
Figure 11 – Password Change
This space has been intentionally reserved for notes:
2 8
2 8