D-Link xStackTM DGS-3300 User Manual page 77

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
show system_severity
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the system severity settings currently implemented on the Switch:
DGS-3324SRi:4#config system_severity trap critical
Command: config system_severity trap critical
Success.
DGS-3324SRi:4#
To display the current severity settings set on the Switch.
show system_severity
This command is used to view the severity settings that have been
implemented on the Switch using the config system_severity
command.
None.
None.
DGS-3324SRi:4#show system_severity
Command: show system_severity
system_severity log
system_severity trap
DGS-3324SRi:4#
: information
: critical
74