D-Link xStackTM DGS-3300 User Manual page 286

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
enable bootp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable the BOOTP relay function:
DGS-3324SRi:4#enable bootp_relay
Command: enable bootp_relay
Success.
DGS-3324SRi:4#
disable bootp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable the BOOTP relay function:
DGS-3324SRi:4#disable bootp_relay
Command: disable bootp_relay
Success.
DGS-3324SRi:4#
Used to enable the BOOTP relay function on the Switch.
enable bootp_relay
This command, in combination with the disable bootp_relay
command below, is used to enable and disable the BOOTP relay
function on the Switch.
None.
Only administrator-level users can issue this command.
Used to disable the BOOTP relay function on the Switch.
disable bootp_relay
This command, in combination with the enable bootp_relay
command above, is used to enable and disable the BOOTP relay
function on the Switch.
None.
Only administrator-level users can issue this command.
283