D-Link xStackTM DGS-3300 User Manual page 158

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
Command
enable admin
config admin local_enable
Each command is listed, in detail, in the following sections.
enable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the system access authentication policy:
disable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the system access authentication policy:
DGS-3324SRi:4#disable authen_policy
Command: disable authen_policy
Success.
DGS-3324SRi:4#
Parameters
<password 15>
Used to enable system access authentication policy.
enable authen_policy
This command will enable an administrator-defined authentication
policy for users trying to access the Switch. When enabled, the
device will check the method list and choose a technique for user
authentication upon login.
None.
Only administrator-level users can issue this command.
DGS-3324SRi:4#enable authen_policy
Command: enable authen_policy
Success.
DGS-3324SRi:4#
Used to disable system access authentication policy.
disable authen_policy
This command will disable the administrator-defined authentication
policy for users trying to access the Switch. When disabled, the
Switch will access the local user account database for username and
password verification. In addition, the Switch will now accept the local
enable password as the authentication for normal users attempting to
access administrator level privileges.
None.
Only administrator-level users can issue this command.
155