D-Link xStackTM DGS-3300 User Manual page 38

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
delete snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously entered SNMP user on the Switch:
DGS-3324SRi:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DGS-3324SRi:4#
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DGS-3324SRi:4#create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Command: create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Success.
DGS-3324SRi:4#
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
delete snmp user <SNMP_name 32>
The delete snmp user command removes an SNMP user from
its SNMP group and then deletes the associated SNMP group.
<SNMP_name 32> − An alphanumeric string of up to 32
characters that identifies the SNMP user that will be deleted.
Only administrator-level users can issue this command.
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
Only administrator-level users can issue this command.
35