xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config ssh algorithm
Restrictions
Usage Example:
To configure SSH algorithm:
DGS-3324SRi:4# config ssh algorithm blowfish enable
Command: config ssh algorithm blowfish enable
Success.
DGS-3324SRi:4#
show ssh algorithm
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display SSH algorithms currently set on the Switch:
twofish128 - This parameter will enable or disable the twofish128
encryption algorithm.
twofish192 - This parameter will enable or disable the twofish192
encryption algorithm.
MD5 - This parameter will enable or disable the MD5 Message
Digest encryption algorithm.
SHA1 - This parameter will enable or disable the Secure Hash
Algorithm encryption.
DSA - This parameter will enable or disable the Digital Signature
Algorithm encryption.
RSA - This parameter will enable or disable the RSA encryption
algorithm.
[enable | disable] – This allows users to enable or disable algorithms
entered in this command, on the Switch.
Only administrator-level users can issue this command.
Used to display the SSH algorithm setting.
show ssh algorithm
This command will display the current SSH algorithm setting status.
None.
None.
182