D-Link xStackTM DGS-3300 User Manual page 40

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
delete snmp view
Restrictions
Example usage:
To delete a previously configured SNMP view from the Switch:
DGS-3324SRi:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DGS-3324SRi:4#
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DGS-3324SRi:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
--------------------
ReadView
WriteView
NotifyView
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 11
DGS-3324SRi:4#
<oid> − The object ID that identifies an object tree (MIB tree) that
will be deleted from the Switch.
Only administrator-level users can issue this command.
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view
previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
None.
Subtree
-------------------------
1
1
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
37
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Included
Included
Excluded
Included