D-Link xStackTM DGS-3300 User Manual page 51

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
Example Usage:
To turn on SNMP authentication trap support:
DGS-3324SRi:4#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-3324SRi:4#
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
disable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To prevent SNMP traps from being sent from the Switch:
Used to show SNMP trap support on the Switch.
show snmp traps
This command is used to view the SNMP trap support status
currently configured on the Switch.
None.
Only administrator-level users can issue this command.
DGS-3324SRi:4#show snmp traps
Command: show snmp traps
SNMP Traps : Enabled
Authenticate Traps : Enabled
DGS-3324SRi:4#
Used to disable SNMP trap support on the Switch.
disable snmp traps
This command is used to disable SNMP trap support on the
Switch.
None.
Only administrator-level users can issue this command.
48