Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
Usage Example:
To display the link state database of OSPF:
DGS-3324SRi:4#show ospf lsdb
Command: show ospf lsdb
Area
ID
-----------
0.0.0.0
0.0.0.0
1.0.0.0
1.0.0.0
1.0.0.0
*
Total Entries: 5
DGS-3324SRi:4#
show ospf neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To display the current OSPF neighbor router table:
DGS-3324SRi:4#show ospf neighbor
Command: show ospf neighbor
IP Address of
Neighbor
---------------
10.48.74.122
Total Entries: 1
DGS-3324SRi:4#
NOTE: When this command displays a "
LSDB table for the area_id or the Cost, this is interpreted as "no area ID"
for external LSAs, and as "no cost given" for the advertised link.
LSDB
Advertising
Type
Router ID
--------------
------------------ ------------------ -------
RTRLink
50.48.75.73
Summary
50.48.75.73
RTRLink
50.48.75.73
Summary
50.48.75.73
Summary
50.48.75.73
ASExtLink
50.48.75.73
Used to display the current OSPF neighbor router table.
show ospf neighbor {<ipaddr>}
This command will display the current OSPF neighbor router table.
<ipaddr> − The IP address of the neighbor router.
None.
Router ID of
Neighbor
--------------
10.2.2.2
*
" (a star symbol) in the OSPF
Link State
Cost
ID
50.48.75.73
*
10.0.0.0/8
1
50.48.75.73
*
40.0.0.0/8
1
50.0.0.0/8
1
1.2.0.0/16
20
Neighbor Neighbor
Priority
State
--------
------------
1
Initial
332
Sequence
Number
-----------------
0x80000002
0x80000001
0x80000001
0x80000001
0x80000001
0x80000001
Advertisement
Table of Contents
