D-Link xStackTM DGS-3300 User Manual page 52

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#disable snmp traps
Command: disable snmp traps
Success.
DGS-3324SRi:4#
disable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable the SNMP authentication trap support:
config snmp system_contact
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch contact to "M I S D e p a r t m e n t I I ":
Used to disable SNMP authentication trap support.
disable snmp authenticate_traps
This command is used to disable SNMP authentication support on
the Switch.
None.
Only administrator-level users can issue this command.
DGS-3324SRi:4#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-3324SRi:4#
Used to enter the name of a contact person who is responsible for
the Switch.
config snmp system_contact {<sw_contact>}
The config snmp system_contact command is used to enter the
name and/or other information to identify a contact person who is
responsible for the Switch. A maximum of 255 character can be
used.
<sw_contact> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no contact.
Only administrator-level users can issue this command.
49