D-Link xStackTM DGS-3300 User Manual page 43

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666"
DGS-3324SRi:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DGS-3324SRi:4#
show snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
DGS-3324SRi:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DGS-3324SRi:4#
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID>
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
<snmp_engineID> − An alphanumeric string that will be used to
identify the SNMP engine on the Switch.
Only administrator-level users can issue this command.
Used to display the identification of the SNMP engine on the
Switch.
show snmp engineID
The show snmp engineID command displays the identification of
the SNMP engine on the Switch.
None.
None.
40