Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config router_ports_forbidden
Parameters
Restrictions
Example usage:
To set up forbidden router ports:
DGS-3324SRi:4#config router_ports_forbidden default add 2:1-2:10
Command: config router_ports_forbidden default add 2:1-2:10
Success.
DGS-3324SRi:4#
show router_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the router ports.
<vlan_name 32> − The name of the VLAN on which the router port
resides.
[add | delete] - Specifies whether to add or delete forbidden ports of
the specified VLAN.
<portlist> − Specifies a range of ports that will be configured as
forbidden router ports. The port list is specified by listing the lowest
switch number and the beginning port number on that switch,
separated by a colon. Then the highest switch number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated
by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4
specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port 4 − in numerical order.
Only administrator-level users can issue this command.
Used to display the currently configured router ports on the Switch.
show router_ports {vlan <vlan_name 32>} {static | dynamic |
forbidden}
This command will display the router ports currently configured on
the Switch.
vlan <vlan_name 32> − The name of the VLAN on which the router
port resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically
configured.
forbidden – Displays router ports that have been labeled as
forbidden.
None.
144
Advertisement
Table of Contents
