D-Link xStackTM DGS-3300 User Manual page 249

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
Command
config sim
download sim_ms
upload sim_ms
Each command is listed, in detail, in the following sections.
enable sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SIM on the Switch:
DGS-3324SRi:4#enable sim
Command: enable sim
Success.
DGS-3324SRi:4#
disable sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SIM on the Switch:
Parameters
[{[commander {group_name <groupname 64> | candidate] |
dp_interval <sec 30-90> | hold_time <sec 100-255>}
[firmware_from_tftp | configuration_from_tftp] <ipaddr>
<path_filename> {[members <mslist 1-32> | all}}
[configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename>
{[members <mslist 1-32> | all]}
Used to enable Single IP Management (SIM) on the Switch
enable sim
This command will enable SIM globally on the Switch. SIM features
and functions will not function properly unless this function is
enabled.
None.
Only administrator-level users can issue this command.
Used to disable Single IP Management (SIM) on the Switch.
disable sim
This command will disable SIM globally on the Switch.
None.
Only administrator-level users can issue this command.
DGS-3324SRi:4#disable sim
Command: disable sim
Success.
DGS-3324SRi:4#
246