D-Link xStackTM DGS-3300 User Manual page 33

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
To configure the port security:
show port_security
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the port security configuration:
DGS-3324SRi:4#show port_security ports 1:1-1:19
Command: show port_security ports 1:1-1:19
Port# Admin State
----
1:1
1:2
1:3
1:4
1:5
1:6
1:7
1:8
1:9
1:10
1:11
1:12
1:13
1:14
1:15
1:16
1:17
1:18
1:19
DGS-3324SRi:4#
DGS-3324SRi:4#config port_security ports 5:1-5:5 admin_state
enable max_learning_addr 5 lock_address_mode DeleteOnReset
Command: config port_security ports 5:1-5:5 admin_state
enable max_learning_addr 5 lock_address_mode DeleteOnReset
Success
DGS-3324SRi:4#
Used to display the current port security configuration.
show port_security {ports <portlist>}
This command is used to display port security information of the
Switch ports. The information displayed includes port security admin
state, maximum number of learning address and lock mode.
ports <portlist> − Specifies a port or range of ports to be viewed.
The port list is specified by listing the lowest switch number and the
beginning port number on that switch, separated by a colon. Then the
highest switch number, and the highest port number of the range
(also separated by a colon) are specified. The beginning and end of
the port list range are separated by a dash. For example, 1:3
specifies switch number 1, port 3. 2:4 specifies switch number 2, port
4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and
switch 2, port 4 − in numerical order.
None.
Max. Learning Addr.
----------- -------------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Lock Address Mode
-----------------
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
10 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
1 DeleteOnReset
30